6
Maintenance and Safety Inspection
1) After using the probe, it should be cleaned and
disinfected/sterilized following "5. Cleaning,
Disinfection and Sterilization", then store it in a cool
and dark place avoid high temperature and humidity, direct
sunlight.
2) After using the Magnetic sensor attachment and the Spacer
for EZU-RV2S, they should be cleaned and
disinfected/sterilized following "5. Cleaning,
Disinfection and Sterilization", then store them in a cool
and dark place avoid high temperature and humidity, direct
sunlight.
3) Visually inspect the surface of the probe head, the
housing, the cable and the connector for any crack,
scratch or denaturalization. If you find any damage, do
not use the probe and immediately contact a service
support.
4) Visually inspect the surface of the Magnetic sensor
attachment and the Spacer for EZU-RV2S for any crack,
deformation or denaturalization. If you find any damage,
do not use them and contact a service support immediately.
- 25 -
Q1E-EP0780