Hitachi EUP-B512 Instruction Manual page 14

4.1.1 How to attach the Magnetic Sensor
The procedure of attaching the Magnetic sensor is as follows.
1) Attach the Spacer for EZU-RV2S to the Magnetic sensor.
2) Attach the Magnetic sensor into the probe with the correct
direction as shown in Fig.4.
3) Insert the slot of the attachment into the projected part
of the probe.
1)
2)
3)
Magnetic sensor
attachment
Fig.4 How to attach the Magnetic sensor attachment
1) Never attach the Magnetic sensor attachment to the probe in
the incorrect direction, otherwise it may result in false
diagnosis.
2) Never forget to attach the Spacer for EZU-RV2S to the Magnetic
sensor, otherwise it may result in false diagnosis.
Spacer for EZU-RV2S
Magnetic sensor
(EZU-RV2S: Black)
Projected part of
the EZU-RV2S (Place
the projected part
upward as shown
here)
Slot of the
attachment
Projected part of the probe
CAUTION
- 8 -
Spacer for EZU-RV2S
Magnetic sensor
(EZU-RV2S: Black)
Q1E-EP0780