4.1.2 How to release the Magnetic Sensor
Th
e procedure of releasing the Magnetic sensor from the probe
is as follows.
a) Press the area of the Magnetic sensor attachment shown with
the arrow toward the direction A, and then slide out the
attachment toward the direction B as shown in Fig.5 and
it from the probe.
release
Press this area
Fig.5 How to release the attachment from the probe
b) Release the Magnetic sensor from the groove of the probe
as shown in Fig.6 and release the Spacer for EZU-RV2S from
the Magnetic sensor.
Fig.6 How to release the Magnetic sensor from the groove
of the probe
A
B
- 9 -
Slide the attachment in this
direction.
Q1E-EP0780