Huawei ECC500 User Manual page 53

ECC500
User Manual
Figure 4-24 LCD screen display
Procedure
Step 1 Operate the DIP switch S1 on the optional Modbus card to set the UPS2000G-B device
address.
Toggles 1 to 8 of DIP switch S1 specify the device address in binary mode. ON indicates 1,
and OFF indicates 0.
Table 4-5 Mapping between device addresses and Modbus card DIP switch settings
Device Toggle
Address Switch 1
1 ON
2 OFF
3 ON
4 OFF
----End
Issue 03 (2020-01-06)
Table 4-5
Toggle Toggle
Switch 2 Switch 3
OFF OFF
ON OFF
ON OFF
OFF ON
Copyright © Huawei Technologies Co., Ltd.
shows an example of the switch settings.
Toggle Toggle
Switch 4 Switch 5
OFF OFF
OFF OFF
OFF OFF
OFF OFF
4 Installation and Commissioning
Toggle Toggle
Switch 6 Switch 7
OFF OFF
OFF OFF
OFF OFF
OFF OFF
Toggle
Switch 8
OFF
OFF
OFF
OFF
46