Safety Symbols On Controller Labels - ABB IRC5 Compact Product Manual

1.2.2 Safety symbols on controller labels

Introduction to symbols
This section describes safety symbols used on labels (stickers) on the controller.
Symbols are used in combinations on the labels, describing each specific warning.
The descriptions in this section are generic, the labels can contain additional
information such as values.
Types of symbols
Both the manipulator and the controller are marked with symbols, containing
important information about the product. This is important for all personnel handling
the robot, for example during installation, service, or operation.
The safety labels are language independent, they only use graphics. See
on safety labels on page
The information labels can contain information in text.
Symbols on safety labels
Label
xx1400001152
xx1800000835
Product manual - IRC5 Compact
3HAC047138-001 Revision: M
Note
The symbols on the labels on the product must be observed. Additional symbols
added by the integrator must also be observed.
© Copyright 2009-2020 ABB. All rights reserved.
1.2.2 Safety symbols on controller labels
23.
Description
Read the user manual before use.
CE label
1 Safety
Symbols
Continues on next page
23