Connecting A Flexpendant - ABB IRC5 Compact Product Manual

2 Installation and commissioning

2.6.1.2 Connecting a FlexPendant

2.6.1.2 Connecting a FlexPendant
Location of FlexPendant connector
The FlexPendant connector on the Compact Controller is located on the front of
the controller.
xx1400001371
A
Connecting a FlexPendant
1
2
3
Continues on next page
54
CAUTION
Always inspect the connector for dirt or damage before connecting it to the
controller. Clean or replace any damaged parts.
A
FlexPendant connector
Action
Locate the FlexPendant socket connector
on the controller or operator's panel.
Plug in the FlexPendant cable connector.
Screw the connector lock ring firmly by
turning it clockwise.
© Copyright 2009-2020 ABB. All rights reserved.
Information
The controller must be in manual mode.
Product manual - IRC5 Compact
3HAC047138-001 Revision: M