Mounting The Controller In A 19" Cabinet - ABB IRC5 Compact Product Manual

2.4.3 Mounting the controller in a 19" cabinet

General
The IRC5 Compact controller is designed to fit in a 19" cabinet.
xx1400002112
Required equipment
Equipment
Mounting kit
Standard toolkit
Other tools and procedures may be required. See
references to these procedures in the step-by-
step instructions below.
Procedure
Use the following procedure to remove the axis computer.
1
Product manual - IRC5 Compact
3HAC047138-001 Revision: M
Action
Remove the five feet from the cabinet.
© Copyright 2009-2020 ABB. All rights reserved.
2 Installation and commissioning
2.4.3 Mounting the controller in a 19" cabinet
Information
3HAC052262-001
The content is described in section
Standard toolkit, IRC5 on page
Info/illustration
Continues on next page
209.
47