NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
Figure 7-18 Setting alarm parameter 2
----End
7.1.14 How Do I Commission a Component?
Context
●
●
●
Procedure
Step 1 Choose Maint > Diagnostic Mode > Enter.
Step 2 Set Indoor fan to 50%.
Issue 04 (2021-03-15)
On the diagnostic mode screen, you can turn on or off components, and
control their output ratio.
If you need to manually turn on or off system components in diagnostic
mode, ensure that the smart cooling product is started before operation.
The following describes how to commission an indoor fan.
NO TE
On the screen for entering the diagnostic mode:
● Components are interlocked. Therefore, buttons for turning on or off certain
components are in gray, indicating that operations of the components are not allowed.
● To ensure system security, a component may not promptly respond to operations
performed on this screen. For example, the compressor does not respond promptly after
the Off (On) button is tapped if the shortest running (shutdown) time is not met.
● To exit the diagnostic mode, tap
● The system automatically exits diagnostic mode when it reaches the maximum
diagnostic mode duration.
Copyright © Huawei Technologies Co., Ltd.
on the status bar.
7 FAQ
187