Scan To Image - Brother DCP-120C Software User's Manual

Scan to Image

When you choose Scan to Image, your document will be scanned and sent directly to the Macintosh
designated on your network. ControlCenter2 will activate the default graphics application on the designated
®
Macintosh . You can change the Scan configuration. (See Image (example: Apple PreView) on page 10-5.)
a
Load your document.
b
Press Scan.
c
Press a or b to choose Scan to Image.
Press Menu/Set. (For MFC)
Press Set. (For DCP)
d
Press a or b to choose the destination Macintosh
Press Menu/Set. (For MFC)
Press Set. (For DCP)
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
®
Macintosh on the control panel.
Press Menu/Set. (For MFC)
Press Set. (For DCP)
The machine will start the scanning process.
Network Scanning (For models with network support as standard)
®
you want to send to.
®
you
11 - 4