Accessing The Scanner - Brother DCP-120C Software User's Manual

Accessing the scanner

a
Open the software application (ScanSoft
Note
The instructions for scanning in this Guide are for when you use ScanSoft
scanning into another software application the steps may vary.
b
Click File, then Scan. Or click the Scan button.
The Scan panel appears in the left side of the screen.
c
Choose the scanner you are using from the Scanner drop-down list.
Note
®
• For Windows XP:
Choose TW-Brother MFC-XXXX USB, TW-Brother DCP-XXXX USB,
TW-Brother MFC-XXXX LAN or TW-Brother DCP-XXXX LAN.
• For others:
Choose Brother MFC-XXXX USB, Brother DCP-XXXX USB,
Brother MFC-XXXX LAN or Brother DCP-XXXX LAN.
(Where XXXX is your model name)
d
Click Scan.
The Scanner Setup dialog box appears:
® ®
PaperPort 9.0SE) to scan a document.
Scanning
® ®
PaperPort 9.0SE. If you are
2 - 2