For Network Cable Users - Brother DCP-120C Software User's Manual

For network cable users

(Not available for DCP-115C, DCP-116C, DCP-117C, DCP-120C
and MFC-215C)
a ®
Put a SmartMedia
SecureDigital™ or xD-Picture Card™
1
This product also supports CompactFlash
2
MagicGate Memory Stick
b
Double-click the Network PhotoCapture Center icon.
Your browser software appears and a list of file names on your media card is shown.
Note
Your browser software accesses the media card using FTP and the network Host Name of the machine.
You can open the software by entering ftp://XXX.XXX.XXX.XXX (where XXX.XXX.XXX.XXX is the IP
address of your Brother machine).
c
Click the name of the file you want to see.
When you take out a media card, do the following to prevent damage to the media card:
a
Close the browser.
b
Wait until the PhotoCapture key stops blinking before taking out the media card.
CAUTION
DO NOT unplug the power cord or remove a SmartMedia
Pro™, MultiMediaCard™, SecureDigital™ or xD-Picture Card™ from the machine while it is reading the
card (the PhotoCapture key is flashing). You could lose your data or damage the card.
If you take out the media card while the PhotoCapture key is flashing, you must restart your PC at once
before putting the media card back in. If you put in another media card before the PC is restarted, the data
on it may be destroyed.
® 1
, CompactFlash , Memory Stick
1
into your machine.
®
type1 and xD-Picture Card™ type M (Large Capacity).
®
and Memory Stick Pro™ can be used, but any music data that is stored on the stick cannot be read.
® 2
, Memory Stick Pro™, MultiMediaCard™,
® ®
, CompactFlash , Memory Stick
PhotoCapture Center™
®
, Memory Stick
7 - 3