Brother Scanner Utility - Brother DCP-120C Software User's Manual

Brother Scanner Utility

The Brother Scanner Utility is used for configuring the WIA scanner driver for resolutions greater than
1200 dpi and for changing the paper size. If you want to set Legal size as the default size, use this utility to
change the setting. You must restart your PC for the new settings to take effect.
Note
The paper size setting is not available for the DCP-115C, DCP-116C, DCP-117C, DCP-315CN and
MFC-215C.
Running the utility
You can run the utility by choosing Scanner Utility located in the
Start/All Programs/Brother/MFL-Pro Suite MFC-XXXX menu (where XXXX is your model
name)/Scanner Settings.
Note
If you scan the document at a resolution of greater than 1200 dpi, the file size may be very large. Make
sure that you have enough memory and hard disk space for the size of the file you are trying to scan. If
you do not have enough memory or hard disk space then your PC may freeze and you could lose your file.
Scanning
2 - 12