Network Scanning (For Models With Network Support As Standard); Before Using Network Scanning; Configuring Network Scanning - Brother DCP-120C Software User's Manual

Network Scanning
11
(For models with network support as
standard)
Note
Available for Mac OS
If you want to scan from the machine on a network, you must choose the networked machine in the
DeviceSelector application located in Macintosh HD/Library/Printers/Brother/Utilities or from the Model pop-
up menu in the main screen of ControlCenter2. If you already installed the MFL-Pro Software following the
network installation steps in the Quick Setup Guide then this selection should already be made.
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the control panel. (See the Network User's Guide on the CD-ROM.)
Note
Max. 25 clients can be connected to one machine on a network. For example, if 30 clients try to connect
at a time, 5 clients will not be shown on the LCD.

Before using Network Scanning

Configuring network scanning

a
From Library, choose Printers, Brother, Utilities and DeviceSelector, and then double-click
DeviceSelector.
The DeviceSelector window appears. This window can also be opened from ControlCenter2.
Note
Network scanning and ControlCenter2 are not available for Mac OS
b
Choose network from the Connection Type pop-up menu.
®
X 10.2.4 or greater.
®
9.1-9.2.
11 - 1