Configuring The Network Pc-Fax Receiving Settings - Brother DCP-120C Software User's Manual

Configuring the Network PC-FAX Receiving Settings

The settings to send received faxes to your computer were automatically configured during the installation of
MFL-Pro Suite (see the Quick Setup Guide).
If you wish to change the network PC-FAX Receiving settings, follow the steps below.
a
In the PC-FAX RX Setup dialogue box, click the Network Settings button. The Network Settings
dialogue box appears.
b
You must specify the IP address or name of your machine.
Specify your machine by address
1
Enter the IP address of the machine in IP Address.
Specify your machine by name
1
Enter the machine node name in Node Name, or click the Browse button and choose the correct
Brother machine you want to use from the list.
Specify your PC name
1
You can specify the PC name that will appear on the display of the machine. To change the name,
enter the new name in Display Your PC Name.
Brother PC-FAX Software (Not available for DCP models)
6 - 17