Scanning A Document Into The Pc - Brother DCP-120C Software User's Manual

Scanning a document into the PC

There are two ways in which you can scan a whole page. You can either use the ADF (automatic document
feeder) or the Flatbed scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the
scanner glass (Flatbed). (See Pre-Scanning to crop a portion you want to scan on page 2-3.)
Scanning a document using the ADF
a
Load your document.
1 Paper source
2 Picture type
3 Adjust the quality of the scanned picture
4 Page size
b
Choose Document Feeder from the Paper source drop-down list (1).
c
Choose the picture type (2).
d
Choose the Paper size from the drop-down list (4).
e
If you need advanced settings, click Adjust the quality of the scanned picture (3). You can choose
Brightness, Contrast, Resolution and Picture Type from Advanced Properties. Click OK after you
choose a setting.
1
2
3
4
Scanning
2 - 9