Scan To Ocr - Brother DCP-120C Software User's Manual

Scan to OCR

When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh
designated on your network. ControlCenter2 will activate the OCR software installed on your Macintosh
®
(Presto! PageManager
processing application on the designated Macintosh
(Word Processing program) on page 10-6.)
a
Load your document.
b
Press Scan.
c
Press a or b to choose Scan to OCR.
Press Menu/Set. (For MFC)
Press Set. (For DCP)
d
Press a or b to choose the destination Macintosh
Press Menu/Set. (For MFC)
Press Set. (For DCP)
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
®
Macintosh on the control panel.
Press Menu/Set. (For MFC)
Press Set. (For DCP)
The machine will start the scanning process.
Note
®
Presto! PageManager
®
) and convert your document into text for viewing and editing from a word
®
must be installed on your Macintosh
Network Scanning (For models with network support as standard)
®
. You can change the Scan configuration. (See OCR
®
you want to send to.
®
.
®
you
®
11 - 5