Cases That Require Setting Changes - NEC N8100-1983F User Manual

Table of Contents

Advertisement

Chapter 3 Setup
2.4

Cases that Require Setting Changes

Specify parameters according to the following table when your system matches "Description". The list of
SETUP parameters and factory settings are described in Chapter 2 (1. System BIOS) in "Maintenance
Guide".
Category
Basic
Change date and time
On/Off NumLock on power ON
On/Off the function to display
the NEC logo during POST
Optional
When an optional board is
board
installed, set to [Disabled] for
Option ROM for all PCI devices
except for the boot device.
Memory
Configure the memory after the
DIMM is added or exchanged.
Boot
Change the boot order of
devices
Use remote power on feature
(from modem)
Use remote power on feature
(from RTC alarm)
Control from HW console
terminal
Security
Set a password to restrict
operation of SETUP.
Set a password to restrict
booting.
Description
Main → System Date
Main → System Time
Boot → Bootup Numlock State
Boot → Quite Boot → Disabled
Advanced → PCI Configuration → PCI
Device Controller and Option ROM
Settings → PCI Slot n Option ROM →
Enabled
Advanced → PCI Configuration → PCI
Device Controller and Option ROM
Settings → LAN1 Option ROM Scan →
Disabled
Advanced → Memory Configuration →
Memory Retest → Yes
Boot → Boot Option Priorities →
Change the boot priority
Advanced → Advanced Chipset
Configuration → Wake On Ring →
Enabled
Advanced → Advanced Chipset
Configuration → Wake On RTC Alarm
→ Enabled
Advanced → Serial Port Configuration
→ Change respective setting.
Security → Administrator Password
→ Security → User password
Security → Password on Boot →
Enabled
Express5800/T110f-S User's Guide
To be changed
Configurable on OS
By pressing <Esc> key, prevent
the display of the logo.
n is PCI slot number of the
RAID Controller
Option ROM on LAN1 must be
disabled.
After rebooting, the Memory
Retest setting changes to No
automatically.
After a password is set, the
entry of password is displayed
when SETUP is launched.
You can select this parameter
after you set a password.
2. System BIOS Setup
Remark
115

Advertisement

Table of Contents
loading

Table of Contents