Table of Contents
Advertisement
Chapter 2 Preparations
1.19
Installing Top Cover
When all internal optional devices including DIMM and PCI card are installed, close the server with Top Cover.
1.19.1 Installation
1.
Put the top cover (rear) straight on the server chassis so that it can be surely engaged with the chassis
frame.
2.
Slide the top cover (rear) toward the front of the server.
3.
Tighten thumb nut on the rear panel.
4.
Put the top cover (front) straight on the server chassis so that it can be surely engaged with the chassis
frame.
5.
Slide the top cover (front) toward the rear of the server, until it is locked with clicking sound.
Important
To avoid damage to the cable, connect cables for PCI card such as LAN cable
after installing Top Cover.
Express5800/R120e-2E User's Guide
1. Installing Internal Optional Devices
117
Advertisement
Table of Contents
