Table of Contents
Advertisement
Chapter 2 Preparations
1.18.1 Connecting cables
To use an on-board RAID Controller or optional RAID Controller, the interface cable must be connected.
Refer to the figures below for how to connect cables.
16x 2.5-inch Drive Model: When using onboard RAID controller (1 to 4 drives)
MotherBoard
HDD Backplane Board
MB (SATA Connector)
HDD Backplane Board
SATA0_3
Express5800/R120e-2E User's Guide
MB (HDD Backplane Board
Signal connector)
Hard Disk Drive
SAS0_3
1. Installing Internal Optional Devices
SAS/SATA Cable
SGPIO Cable
Port 0
Port 1
Port 2
Port 3
111
Advertisement
Table of Contents
