NEC Express5800/R120e-2E User Manual page 78

Chapter 2 Preparations
4. Remove the screw, and remove RAID
Controller bracket.
5. Remove the two screws from RAID
Controller, and remove PCI bracket.
6. Install the controller bracket you have
removed in Step 4 to RAID Controller
with two screws you have removed in
Step 5.
7. Install a RAID Controller to the riser
card.
When installing the card, position the
terminal part of the PCI card to the riser
card slot and insert it.
8. Attach the RAID Controller to the rise card.
For how to install RAID Controller, refer to
Chapter 2 (1.13 PCI Card).
78
Important
When connecting FBU control cable to RAID Controller and FBU, be sure to
mate the black marks on FBU control cable connector and on RAID Controller
connector. If the cable is connected conversely, the component might be
damaged.
Express5800/R120e-2E User's Guide
1. Installing Internal Optional Devices
Screw
RAID Controlller bracket
Black mark