Table of Contents
Advertisement
Chapter 2 Preparations
1.9.2
Installation
Follow steps below to install the processor.
1.
Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Remove the duct.
3.
Locate the CPU socket to which you are going to install a processor.
4.
Push down the socket lever once to unlatch it from the hook, then slowly open the lever until it stops.
5.
Lift the plate.
Important
You will see the CPU socket contacts. Do not touch the socket contacts.
Express5800/R120e-2E User's Guide
1. Installing Internal Optional Devices
63
Advertisement
Table of Contents
