Table of Contents
Advertisement
Chapter 2 Preparations
5.
Hold the drive carrier firmly and insert it into
the slot.
6.
Slowly close the handle.
The drive carrier is locked making a clicking sound.
7.
Turn on the server, run BIOS SETUP utility, and then specify the boot order from the Boot menu. For
details about the Boot menu, refer to Chapter 2 (1.2.5 Boot) in "Maintenance Guide".
This process is required because the saved boot order is cleared when you add a Hard Disk Drive.
• Push it all the way until the handle's lock touches the frame.
Note
• Hold the drive carrier firmly with both hands.
Note
When you push the drive into the slot, confirm the handle got hooked on the frame.
Express5800/R120e-2E User's Guide
1. Installing Internal Optional Devices
121
Advertisement
Table of Contents
