Section 4
Logic
ALMCALH output signal and the physical outputs allows the user to adapt the alarm signal to
physical tripping outputs according to the specific application needs.
4.3.3
Setting guidelines
Operation : On or Off
4.4
Logic for group alarm WRNCALH
4.4.1
Identification
Function description
Logic for group warning
4.4.1.1
Application
Group warning logic function WRNCALH is used to route warning signals to LEDs and/or
output contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to adapt the
warning signal to physical tripping outputs according to the specific application needs.
4.4.1.2
Setting guidelines
OperationOn or Off
4.5
Logic for group indication INDCALH
4.5.1
Identification
Function description
Logic for group indication
4.5.1.1
Application
Group indication logic function INDCALH is used to route indication signals to different LEDs
and/or output contacts on the IED.
INDCALH output signal IND and the physical outputs allows the user to adapt the indication
signal to physical outputs according to the specific application needs.
4.5.1.2
Setting guidelines
Operation : On or Off
32
IEC 61850
identification
WRNCALH
IEC 61850
identification
INDCALH
© Copyright 2017 ABB. All rights reserved
GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4
IEC 60617
ANSI/IEEE C37.2
identification
device number
-
-
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4
IEC 60617
ANSI/IEEE C37.2
identification
device number
-
-
GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1
GUID-7E776D39-1A42-4F90-BF50-9B38F494A01E v2
Switchgear control unit SAM600-IO
1MRK 511 445-UEN B
Application manual