Siemens 6SN1123-1AA00-0DA2 Configuration Manual page 234

02.12
05.01
Caution
The connections/terminals may not be interchanged:
S
S
If this is not observed, the line filter could be damaged.
Table 7-14 Assigning the wideband filters to the I/R modules
Filter Line filter
components 16 kW
Rated AC current 30 A
Supply voltage 3–ph. 380 V – 10% ... 3–ph. 480 V AC + 10% (TN line supply)
Order number 6SL3000–
0BE21–6AAV
Mounting position Wall or base/floor mounting, refer to Fig. 7-13
Dimensions (W x H x D), 130x480x150
approx.
Module width Refer to dimension drawings, Chapter 12
Weight, filter 9 kg
Power loss 70 W
Connection 16/10 mm
/1.5 Nm
PE, M5 studs/
3 Nm
Terminals L1, L2, L3, PE
Line supply connection
(line)
Terminals U, V, W
Load connection (load)
4)
I fuse 35 A
rated
Permissible
ambient temperature
S
Operation [°C]
S
–25 ... +70
Storage/transport [°C]
Cooler Natural ventilation
Degree of protection to IP20
EN 60529 (IEC 60529)
DIN EN 61800-3 (IEC Limit value Class C2
61800-3)/VDE 0160-103 ra-
dio interference suppres-
sion
1) The permissible supply voltage of the system depends on the infeed module used.
2) For ring cable lugs to DIN 46234.
3) The first data applies for pin–type cable lugs, the second data applies for finely–stranded conductors without end sleeves
4) The fuse used must have this rated current. Recommendations for the fuses, refer to Table 7-6.
© Siemens AG 2012 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
Incoming line supply cable to LINE/NETZ L1, L2, L3
Outgoing cable to the line reactor to LOAD/LAST U, V, W
I/RF module I/RF module
16/21 kW 36/47 kW
Line filter
36 kW
67 A
6SL3000–
0BE23–6AAV
130x480x245
16 kg
90 W
2 3) 2
50 mm
/6 Nm
PE, M8
2) 2)
studs/13 Nm
L1, L2, L3, PE
U, V, W
80 A
0 ... +40; maximum +55 at 0.6 • P
7 Line Supply Connection
7.4 Line filters for I/R and UI modules
I/RF module I/RF module
55/71 kW 80/104 kW
Line filter Line filter
55 kW 80 kW
103 A 150 A
; 50...60 Hz $10%
1)
6SL3000– 6SL3000–
0BE25–5AAV 0BE28–0AAV
130x480x260 200x480x260
19 kg 22 kg
110 W 150 W
2 2
50 mm 95 mm
/6 Nm /15 Nm
PE, M8 PE, M8
2) 2)
studs/13 Nm studs/13 Nm
L1, L2, L3, PE L1, L2, L3, PE
U, V, W U, V, W
125 A 160 A
of the l/R module
rated
I/RF module
120/156 kW
Line filter
120 kW
225 A
6SL3000–
0BE31–2AAV
300x480x260
34,5 kg
200 W
2
95 mm
/15 Nm
PE, M8 studs/
2)
13 Nm
L1, L2, L3, PE
U, V, W
250 A
7-233
7