Control Board For 1 Or 2 Axes - Siemens 6SN1123-1AA00-0DA2 Configuration Manual

11.05
05.01
4.2.1

Control board for 1 or 2 axes

Control boards for
The following 2–axis control boards are available:
2 axes
Fig. 4-4
© Siemens AG 2012 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
4.2 "SIMODRIVE 611 universal HRS" control board
2–axis for encoders with sin/cos 1Vpp or
2–axis for resolvers
(refer to Table 4-7)


Mounting slot for
S
Optional TERMINAL module
or
S
Optional PROFIBUS DP module

S
Interfaces
S
Terminals
S
Switches

Memory module
S
Firmware
S
User data

Display and operator unit

Pulse interface

Equipment bus
The following applies to retaining screws:
Tighten (to establish a good shield contact)
max. torque = 0.8 Nm
For plug connections:
Plug connectors with the same number of pins must be
appropriately coded so that they cannot be interchanged (refer to
the index entry "Coding the mini connectors").
Control boards for 2 axes (SIMODRIVE 611 universal HRS)
4 Control Units





X302


4-93
4