HP 81200 User Manual page 63

How to Start the System
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1
How to Start the System in a New Operating Mode
To change the system's operating mode:
1 Double-click the HP 81200 Configuration icon.
Figure 19 HP 81200 Configuration Icon
This opens the Configuration window:
Figure 20 HP 81200 Configuration Window
2 Select the operating mode you wish to use from now on: Local,
Controlled, or Remote (see "How to Start the HP 81200 Software" on
page 62).
Checkboxes indicate which software components will be started.
3 Choose from the options:
– If you intend to start the system in controlled mode and operate it via
LAN, you can disable the HP-IB Gateway.
– Start Automatically can be useful for a controlled system where you
don't have to care about display properties. The setting takes effect as
soon as the DVT user logs in.
– Build Systems checks the available modules and creates new
configuration files dvtsys.txt and dvtits.txt. The present files are
saved as dvtsys.bak and dvtits.bak. If the mainframe contains more
than one master clock module, additional instruments (DSRB,
DSRC, ...) are automatically set up.
For details please refer to the HP 81200 Installation Guide.
Structure of the User Interface
63