Customer Service, Repair And Maintenance; Maintenance Periods - Electrolux SMART Operating Instructions Manual

OPERATING INSTRUCTIONS | SMART LINE | BOILING PAN OPERATING INSTRUCTIONS | SMART LINE | BOILING PAN

8. CUSTOMER SERVICE, REPAIR AND MAINTENANCE

Service, repair and maintenance work must
only be carried out by Electrolux Professional
or Electrolux partner dealers. Country-specific
and local regulations apply. This applies in par-
ticular to safety and regulatory installations. A
service contract is therefore recommended.
Before starting any service, repair or maintenance
work, the appliances must be disconnected from
the mains supply (turn the main switch off or remove
the fuses from the power supply), the gas supply
turned off and drinking water pipes closed off.
Parts requiring replacement must be replaced by
original parts from Electrolux Professional.
The warning and information notices fitted to the
appliances must be obeyed by specialist and cus-
tomer service staff and must not be removed or
altered.
During service / repair and maintenance work, dis-
tractions and stress factors must be avoided. As
such, unauthorised persons must be kept away
from the appliance. Servicing may be not carried
out on ships at sea.
IMPORTANT!
Danger of fire, explosion and death
• When operating the appliance and during main-
tenance, you must make sure there are no mov-
ing parts, such as vents, inside the appliance.
Take extreme care.
14
• Repairs and service on the appliances must be
carried out when heating elements have cooled
down.
• Any internal electrical wiring in the appliance and
the connections to the earth cable are in ac-
cordance with the respective wiring diagrams
and must not be modified. All metal parts which
have electrical connections on them must remain
earthed.
• After completion of the maintenance and re-
pair work, the service technician must carry
out checks to ensure all operating modes of
all functional and safety components are in ac-
cordance with

8.1 Maintenance periods

Similarly constructed appliances are not under ob-
ligation to be certified. They are subjected to a pres-
sure and function test at the factory in accordance
with the relevant guidelines.
Depending on the frequency and intensity of use,
functional parts must be maintained and tested
consistently at regular intervals. However this must
be at least once a calendar year.
DOC.N : ST09184-02
O
the operating instructions.
EN | 02-2015