Whip; Programming Of Own Agitator Program - Electrolux SMART Operating Instructions Manual

OPERATING INSTRUCTIONS | SMART LINE | BOILING PAN

14.2.2 WHIP

The fixed program WHIP is used to whip more
lighter products such as cream. A whip implement
can be used with good results*.
•
Press Increase speed
the display:
PRESET AG.PROGR
WHIP
• Press Agitator start
• Press Increase speed
at the lowest speed of 25 rpm. (Max speed 200
rpm).
• Press Decrease speed
speed.
• Press Agitator stop
* Available as accessory
26
until WHIP appears in
.
and the stirrer starts
to decrease the
to stop the program.
DOC.N
14.2.3 Programming of own
agitator program
•
Press Increase speed
The following text appears in the display:
ADJ AGITATOR PROGRAM
NAME
SPD TIME
XXX XX:XX X
The text that can be changed flashes. (See Name
agitator program).
•
Press Menu forwards
The following text flashes in the display:
SPD TIME
XXX XX:XX X
• Press Increase value
(max 100 rpm) or press Decrease value
lower the speed (min 25 rpm.).
• Confirm by pressing Menu forwards
The following text flashes in the display:
SPD TIME
XXX XX:XX X
The total time the agitator is to run is programmed
here. Specified in minutes and seconds
If " --:--" appears, this means unlimited time.
•
Press Increase value
press Decrease value
• Confirm by pressing Menu forwards
The following text flashes in the display:
SPD TIME
XXX XX:XX N
The letter R means Reverse, which means that the
agitator goes in reverse function and pause.
There are two options to select:
N stands for No which means that the agitator only
runsclockwise ... or
Y stands for Yes which means that the agitator runs
in reverse.
• Confirm by pressing Menu forwards
The figure 1 in the display changes to 2.
SPD TIME
XXX XX:XX N
... or
: ST09184-02
O
once.
1
R PAUSE
XX:XX 1
once.
R PAUSE
XX:XX
to add a higher speed
to
once.
R PAUSE
XX:XX 1
to extend the time or
to shorten the time.
once.
R
1
once.
R
2
EN | 02-2015