Boiling/Cooling - Electrolux SMART Operating Instructions Manual

OPERATING INSTRUCTIONS | SMART LINE | BOILING PAN
When boiling time is over, it transfers to hot keep.
The following text appears in the display:
BOILING/HOT KEEP
WATER XXX+XXX
AGITATOR 000rpm
The time for hot keep is unrestricted and the pan
must be switched off manually in the following way:
14.
Press STOP .
The following question appears in the display:
INTERRUPT?
YES
NO
• Press STOP , the red LED goes out.
22
XXX°C
PRESS STOP
PRESS START
DOC.N
O

13.7 BOILING/COOLING

(if the jacket cooling and mat temp. sensor options
have been selected)
BOILING
BOILING/HOT KEEP
BOILING/COOLING
COOLING
15.
Confirm the selected option by pressing
Menu forwards
• Repeat steps 1-4.
Left LED in Agitator starts
function starts automatically when boiling switches
to cooling. The agitator function can be deselected
by pressing agitator stop
The following text appears in the display:
COOLING
SET TEMPERATURE
• Press Increase value
ature increases (hotter).
If "_ _" appears this means unlimited cooling. (only
option without food temp. sensor "food temperat-
ure probe")
• Press Decrease value
perature decreases (colder).
The following text appears in the display:
BOILING/COOLING
Xh XXmin XX°C
WATER XXX+XXX
-- --
To select the settings made without saving:
16.
Press Increase value
• Continued from step 17.
To save the settings that have just been made:
• Repeat step 6.
If delayed start has been selected (if the flow sensor
option has been selected)
• Confirm by pressing Menu forwards
The following text appears in the display:
DELAY
Xh XXmin XX°C
WATER XXX+XXX
AGITATOR 000rpm
When this appears in the display, the machine can
be started by:
17.
Pressing START
Red LED lights with a fixed light.
Delay to start starts to count down.
For use of agitator (See Agitator).
: ST09184-02
once.
flashing. The agitator
.
XXX°C
and the cooling temper-
and the cooling tem-
XX°C
twice.
once.
XXh XXmin
XXX°C
to start the machine.
EN | 02-2015