Changes In Food Preparation Program; Name The Food Preparation Program - Electrolux SMART Operating Instructions Manual

OPERATING INSTRUCTIONS | SMART LINE | BOILING PAN
For unlimited cooling/ without food temp.sensor,
switch off the pan manually in the following way:
Press STOP .
The following question appears in the display:
INTERRUPT?
YES
NO
• Press STOP , the red LED goes out.
13.9 Changes in food preparation
program
(if the mat temp. sensor and flow sensor options
have been selected)
The values in the food preparation programs BOIL-
ING, BOILING/HOLD or BOILING/COOLING, can
be changed in the following way:
•
Load the program to be changed.
Load programs that are stored by:
• Pressing Increase value
number appears in the display. Tilt Write down
the program number.
• Confirm by pressing Menu forwards
•
Enter the values to be changed e.g.: temp, boi-
lingtime, water , until the following text appears
in the display:
XXXXXXX
Xh XXmin XXX°C
WATER XL
-- --
• Press Increase value
ber to be replaced appears in the display.
• Press Menu forwards
The following question appears in the display:
REPLACE?
YES, PRESS START
NO, PRESS STOP
• Press START and the new values are now
stored in the old number.
24
PRESS STOP
PRESS START
until the program
.
until the program num-
once.
DOC.N
O
13.10 Name the food
preparation program
The food preparation program to be named is to
appear in the display:
XXXXXXX
Xh XXmin XXX°C
WATER XL
XX
• Press Menu back
The following text appears in the display:
XXXXXXX
Xh XXmin XXX°C
WATER XL
XX
• Press Increase value
ber to be replaced appears in the display.
• Press Increase value
ultaneously for 3 seconds.
The following text appears in the display:
SELECT PROGRAM
_
• Press Increase value
select the necessary letter or number.
• Press Menu forwards
the next character position or press Menu back
to move back. (Max 17 characters).
•
Repeat until the program name is entered in the
display.
•
Press Increase value
taneously for 3 seconds and the new program
name appears in the display.
xxxxxx
XhXXmin
WATER XL
XXXXXXXX
• Press Menu forwards
The following question appears in the display:
REPLACE?
YES, PRESS START
NO, PRESS STOP
• Press START and the new values are now
stored in the old number.
: ST09184-02
.
until the program num-
and STOP sim-
NO. X
or Decrease value
to move forwards to
and STOP simul-
XX°C
XX
once.
EN | 02-2015
to