14.4 Programming of own agitator
program
•
Press Increase speed
The following text appears in the display:
ADJ AGITATOR PROGRAM 1
NAME
SPD
TIME
XXX
XX:XX
The text that can be changed flashes. (See Name
agitator program).
•
Press Menu forwards
The following text flashes in the display:
SPD
TIME
XXX
XX:XX
• Press Increase value
(Max. speed 170 rpm for 100 & 150 litre / 140
rpm for 200 & 300 litre pans ) or press Decrease
value
to lower the speed (min 25 rpm.).
• Confirm by pressing Menu forwards
The following text flashes in the display:
SPD
TIME
XXX
XX:XX
The total time the agitator is to run is programmed
here. Specified in minutes and seconds
If " --:--" appears, this means unlimited time.
•
Press Increase value
press Decrease value
• Confirm by pressing Menu forwards
The figure 1 in the display changes to 2.
SPD
TIME
XXX
XX:XX
The following text flashes again:
ADJ AGITATOR PROGRAM 1
NAME
SPD
TIME
XXX
XX:XX
Repeat the procedure from the beginning to add the
different agitator values that are required. This can
be done three times in total.
The following text appears in the display:
ADJ AGITATOR PROGRAM
NAME
SPD
TIME
XXX
XX:XX
EN | 02-2015
once.
1
once.
1
to add a higher speed
once.
1
to extend the time or
to shorten the time.
.
2
2
1
1
DOC.N
: ST09184-02
O
OPERATING INSTRUCTIONS | SMART LINE | BOILING PAN
14.4.1 Name agitator program
•
Press Increase speed
program.
•
Press Increase value
eously for 3 seconds.
The following text appears in the display:
SELECT PROGRAM
NAME
•
Press Increase value
select the suitable letter or number.
• Press Menu forwards
the next character position or press Menu back
to move back to the previous character. (Max
17 characters).
•
Repeat until the program name is entered in the
display.
•
Press Increase value
eously for 3 seconds.
The new agitator program name appears in the
display:
ADJ AGITATOR PROGRAM 1
XXXXXXXXXX
SPD
TIME
XXX
XX:XX X
to select agitator
and STOP
simultan-
or Decrease value
to
to move forwards to
and STOP
simultan-
R
PAUSE
XX:XX 1
29