▪
Locate the PGA locks as shown in Figure M-9 and use a 4 mm Allen key to unscrew
the M5 × 30 screws that hold the PGA locks in place.
Figure M-9: PGA lock (one of two) with screws loosened
▪
Slide out the PGA lock as shown in Figure M-10 on both the right- and left- hand sides.
Figure M-10: Slide out PGA lock
▪
Store the locks and fittings in a secure location. If preferred, the PGA locks and fittings
can be secured to the PGA using the threaded inserts as shown in Figure M-11 to
Figure M-13.
Figure M-11: Slots for threaded inserts
Figure M-13: PGA lock secured using Allen key
MA-005 - Minitrans Installation Manual - Rev 4.5
[Slide out the PGA lock]
Figure M-12: PGA lock storage position
13-Aug-20
Page 69 of 86