Table of Contents
Advertisement
M.3.3
Required tools
The following tools and fittings as listed in Table M-2 and as shown in Figure M-30 are
required in order to attach the brackets to the product.
Table M-2: Cradle lock tools & fittings
Item No.
KAN03010
KAN03012
KAN05026
KAN1050
21-1339
21-1341
M.3.4
Attach the cradle lock
The locks on the exterior isolators must be engaged after the product is powered off, but
before the product is moved. This must be done on both sides.
M.3.4.1 Top isolators
▪
First remove the fittings from the top isolators along with the failsafe configuration as
shown in Figure M-31.
Note:
Fittings and failsafe items must be retained for refitting in Appendix M.3.5.
Figure M-31: Top isolators with fittings & failsafe items removed
MA-005 - Minitrans Installation Manual - Rev 4.5
Description
10 mm nut spinner
5 mm Allen key
10 mm Spanner
M6 flat washers
M6 spring washers
Large flat washers
M6 × 20 stainless
steel bolts
Bottom Locks
Top locking piece
Qty
6
4
2
2
2
2
Figure M-30: Cradle lock tools & fittings
13-Aug-20
Page 79 of 86
Advertisement
Table of Contents
