Before Use; Setting Up The Product; Filling The Water Tank; Set-Up - Silvercrest SGS 600 A1 Operation And Safety Notes

Safety notes / Before use / Set-up
Health Indications:
Excess use is harmful to the skin.
The product should initially only
be used once a day, no more
than two to three times per week.
Pay attention to how your skin
responds to the treatment and
adjust the frequency and dura-
tion of treatment accordingly.
If your skin becomes painful or
you feel unwell during use, stop
the treatment immediately and
seek medical attention.
Skin must be cared for appropri-
ately after every use. The treatment
will otherwise dry out the skin.

Before use

Note: Remove all packaging material from the
product.

Setting up the product

P lace the product on an even, level surface.

Filling the water tank

DANGER OF ELECTRIC
SHOCK!
A lways unplug from the socket before filling
the water tank .
1
L ift the water tank
reservoir .
2
U nscrew the cover counter-clockwise from the
water tank .
1
22 GB/IE
up out of the water
1
F ill the water tank
1
tap water and screw the cover back onto the
water tank .
1
I f necessary, wipe the water tank
R einsert the water tank
reservoir .
2

Set-up

Warming towels

U nplug from the socket and make sure the
product has cooled down.
Turn the steam chamber
until the arrow on the steam chamber
up with the symbol
Fig. B).
R emove the steam chamber
housing (see Fig. C).
6
F old a small, damp facial towel and place in
the housing (see Fig. D).
6
Note: Only use 100 % cotton towels with a
maximum size of 30 x 30 cm.
P ush the steam chamber
housing (see Fig. E).
6
T urn the steam chamber
arrow on the steam chamber
the symbol on the housing
Connect the mains plug to the mains socket.
S et the rotary switch
edge of the rotary switch
W ait for 2 minutes.
S et the rotary switch
for 2 minutes before opening the product to
prevent scalding from hot steam.
T urn the steam chamber
until the arrow on the steam chamber
up with the symbol
Fig. B).
R emove the steam chamber
housing (see Fig. C).
6
R emove the hot towel from the housing
tongs.
CAUTION! RISK OF BURNS DUE TO HOT
SURFACES! The towel is very hot! Allow the
towel to cool to a comfortable temperature be-
fore applying to the facial skin.
with purified, distilled or
dry.
1
in the water
1
counter-clockwise
7
lines
7
on the housing (see
6
from the
7
back into the
7
clockwise until the
7
lines up with
7
(see Fig. F).
6
to position . The
5
will light up blue.
5
to position and wait
5
counter-clockwise
7
lines
7
on the housing (see
6
from the
7
with
6