D-Link DIR-822 User Manual page 29

Section 4 - Configuration
Select Dynamic IPv4 to obtain IPv4 address information automatically from
your Internet Service Provider (ISP).
General Settings
Select your connection type.
Connection Type:
Select your connection interface.
Interface:
Enter name for your connection.
Connection Name:
Toggle this switch to enable the connection. This is enabled by default.
Enable
Connection: Disabling this feature may disable your Internet connection.
Toggle this switch to enable Network Address Translation (NAT). This
NAT:
setting is enabled by default.
Toggle this switch to enable WAN Ping. This setting is disabled by
Ping:
default.
Toggle this switch to enable Routing Information Protocol (RIPng).
RIPng:
This setting is disabled by default.
Toggle this switch to enable ARP Proxy. This setting is disabled by
ARP Proxy:
default.
D-Link DIR-822 User Manual
Dynamic IPv4
25