D-Link DIR-822 User Manual page 65

Section 4 - Configuration
If Enable periodic scanning is enabled, specify the amount of time
Scanning period:
in seconds between scans.
Wi-Fi Network
Specify the desire SSID for your wireless network. All devices must
Network name
connect to this SSID.
(SSID):
Toggle this switch to prevent SSID broadcasting. Clients will still need
Hide SSID:
to enter the correct SSID to connect to your network.
Enter the Basic service set identifiers (BSSID) is used in your network.
BSSID:
Specify the maximum number of clients that can be connected at one
Max Associated
time. Enter 0 for unlimited clients. The default setting is 0.
Clients:
Toggle this switch to enable shaping. This setting is disabled by
Enable shaping:
default.
If Enable shaping is set to enable, specify the shaping threshold in
Shaping (MBits/s):
Mbits/second.
Toggle this switch to disable broadcasting of a wireless network. This
Broadcast wireless
is useful if the router is being configured as a Wi-Fi client. This setting
network:
is enabled by default.
Toggle this switch to prevent Wi-Fi clients from interacting with each
Clients isolation:
other.
Security Settings
Select Open,WPA, WPA-PSK,WPA2, WPA2-PSK, WPA/WPA2 mixed,
Network
WPA-PSK/WPA2-PSK mixed, WPA3-SAE, or WPA2-PSK/WPA3-SAE
authentication:
mixed. The default and recommended setting is WPA2-PSK.
D-Link DIR-822 User Manual
Wireless network (cont)
61