D-Link DIR-822 User Manual page 66

Section 4 - Configuration
If you have selected WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK mixed, WPA3-SAE, or
WPA2-PSK/WPA3-SAE mixed:
Specify a wireless password. Each device connecting to your network
Password:
must enter this password.
Select an encryption type.
Encryption type:
Specify an update interval in seconds. The default setting is 604800.
Group key update
interval:
If you have selected WPA, WPA2, or WPA/WPA2 mixed
Toggle this switch to enable WPA pre-authentication.
WPA2 Pre-
authentication:
Specify the IP address of the RADIUS authentication server.
IP address RADIUS
server:
Specify the port of the RADIUS authentication software.
RADIUS server
port:
Specify the RADIUS encryption key.
RADIUS
encryption key:
Select the encryption type. As of this writing, only AES is supported.
Encryption type:
Specify an update interval in seconds. The default setting is 604800.
Group key update
interval:
Click Apply when you are done.
Click ADD WI-FI NETWORK to create an additional wireless network.
If you want the devices connected to the additional network to be
isolated from the devices and resources of the router's LAN, enable
guest network in its settings.
D-Link DIR-822 User Manual
Wireless network (cont)
62