Wan Failover - D-Link DIR-822 User Manual

Section 4 - Configuration
WAN Failover allows the device to switch to another WAN or Internet
connection in the event that the primary connection becomes unavailable.
Toggle to enable WAN Failover.
Enable:
Connections IPv4
Select your primary internet connection from the list.
Connection:
Switch to enable or disable status checking.
Status of
checking:
Checking availability of hosts
Specify the frequency to check your connection in seconds. The
Check interval:
default setting is 10 seconds.
Specify the amount of time in seconds the device will wait before
Timeout check:
considering a ping to have timed out.
Specify the number of consecutive checks before switching.
Number of checks:
Test hosts
Click here to add additional test host IPs. Specify a test host IP address
ADD HOST:
the router will use to determine the status of the connection. The
default setting is 8.8.8.8, which is the public Google DNS.
Click Apply when you are done.
D-Link DIR-822 User Manual

WAN Failover

59