Advertisement
6-2. KEY-IN OPERATIONS
The operation mode commands for the deck can also be
input from the remote controller in addition to being done by
the operation keys on the main unit.
6-2-1 . Keys on Main Unit
Key operations are input by means of the main controller
from a 5 x 8 matrix circuit. (Refer to the circuit and block
diagrams.)
Option matrix name
ON/OFF
CD
Hl8 / NORMAL
I
@
NTSC
PAL
I
@
JAP
US
@
RCA / NORMAL
I
®
DIGITAL
NORMAL
As is shown above, the options are determined and parts (diodes and resistors) which apply to the resulting matrix are
equipped or not equipped in accordance with the specifications of the deck.
PLAY, STOP, FF, REW, STI LL, START/STOP, EJECT, SCENE+, SCEN E - ,
SLOW, FRAME ADVANCE ... remote controller only
CAM PW ON, VTR PW ON, STAND-BY
TI M E ADJUST, DATE/TI ME
COUNTER RESET, COUNTER M EMORY
ZOOM TELE, ZOOM WIDE, AF/MF, FADE PRESET (Dial type)
PRO MEMO, PRO CANCEL, PRO RUN . . . remote controller only
6-2-2. Remote Controller
Remote operation is possible by using an infrared remote
controller (I R remote controller). I nput signals (REMOTE)
which are converted into electrical signals at the remote
control photo sensor (CP 1 board) are input to the main
controller. For information regarding the signals received,
refer to the monitor remote controller section.
The data received is decoded at the main controller and the
same processing as for key operation is carried out. With
this unit, both wireless and wired operation of the monitor
remote controller are possible.
Judgement condition
Hi8 compatible u nit or normal unit
For NTSC or PAL
For Japan or North America
RCA remote control format or Sanyo codes
Digital camera compatible or normal camera
Table 6-2. Option Table
Function
Table 6-3. Switch Functions and Uses
- 4-32 -
For the method of operating the keys, refer to the
"Instruction Manual."
I n addition, some of these matrix inputs are also equipped
with optional settings depending on model variations.
VCR operation keys
Power operation key
Clock operation key
Tape counter operation key
Camera-related operation keys
Editing-related operation keys
6-2-3. LANC Commander
8 mm camcorders are equipped with a LANC (Local
Application Control Bus System) terminal (PW1 board).
By connecting a commander which conforms to the LANC
standard to this terminal, the range of possible editing
functions (editing by means of an external device) can be
extended.
In addition, when the POWER switch is OFF, power cannot
be supplied from the LANC side to the camcorder.
The LANC control IC (TL 1 596) can switch data communi
cation between an external device and the LANC controller.
VM-EX70P
Hl8 . . . 0N
PAL. . . OFF
Sanyo . . . OFF
Digital ... O FF
PALJHi8
Uses
Advertisement
