Install The Driver - NEC Express5800 Series User Manual

Windows Server 2008/Windows Server 2008 R2
1.
Run OS and launch Explorer.
2.
Point to "%SYSTEMROOT%\SYSTEM32\DRIVERS\Lsi_sas2.sys" and select
Properties on right-click menu.
NOTE:
3.
Click the [Driver] tab in [Properties] dialog box of Lsi_sas2.sys.
4.
The detailed information of Lsi_sas2.sys is displayed.
Confirm the version of driver in [File Version] field.
If the version of driver is 2.0.35.0 or later, you need not to install a driver.
If Lsi_sas2.sys does not exist in your system or the version of driver is older than 2.0.35.0,
you need to install driver. Install the driver according to "Install the Driver".

Install the Driver

This section explains how to install SAS driver for Windows.
Prepare the following media before installation.
"N8405-005 Tape Blade AT101b Driver CD"
NOTES:
Windows Server 2003

This driver is supported for Windows Server 2003 Service Pack 2 or
later.
If your system is not SP2 or later, please update Service Pack.
About OEM-Disk

If you use Backup software, you need OEM-Disk for installing
driver. In this case, copy all files under the following folder in
"N8404-005 Tape Blade AT101b Driver CD" to formatted floppy
disk. After file copy complete, you can use this floppy disk as
OEM-Disk.
[Windows Server 2003 x86]
[Windows Server 2003 x64]
1.
Boot the system and log in Administrator.
If the [Found New Hardware Wizard] is booted, click [Cancel].
When this Wizard is not booted, go to 2.
2.
Insert the CD-ROM labeled "N8404-005 Tape Blade AT101b Driver CD" into the optical
Generally, SYSTEMROOT is placed in C:\Windows.
\win\hba_drv\W2K3x86
\win\hba_drv\W2K3x64
Configuring Your Tape Blade
4-3