Confirmation After Installing The Driver - NEC Express5800 Series User Manual

4-4
Configuring Your Tape Blade
disk drive and use an appropriate tool such as Explorer to double-click
\win\hba_drv\Update.vbs.
(The extension "vbs" may not be displayed depending on configuration.)
3.
The following message appears. Select [Yes].
4.
Driver is automatically installed. After the driver was installed, restart the system
according to on-screen message.
The installation of the driver is completed.

Confirmation after Installing the Driver

Confirm the version of driver software according to "Before Installing the Driver".
If the version of driver is 2.0.35.0, the installation of the driver is successfully.
If Lsi_sas2.sys does not exist in your system or the version of driver is older than 2.0.35.0, you need
to install driver. Re-Install the driver according to "Install the Driver".
Driver Setup
Do you want to setup the SAS Controller driver?
[Yes] [No]