Philips AVENT SCF870 Manual page 17

6 Place the lid on the jar and turn it clockwise to fix it. The small projections on the
lid have to slide into the grooves in the jar. Make sure that the large projection of
the lid is placed exactly over the handle of the jar.
7 Place the jar upright on the motor unit, i.e. with the lid upwards. Make sure the
handle is on the right-hand side and positioned between the two ridges of the
locking area.
8 Turn the control knob to the blending position. Hold the knob in this position until
the food is blended properly.
There is a 30 seconds timer for blending function as an overheat protection. If you
have not finished blending after 30 seconds, the appliance will switch off and beep
twice as a notification. After cooling down for 30 seconds, the appliance beeps once
and you can start blending again.
Note: If the ingredients stick to the wall of the jar, switch off the appliance and loosen
them with the spatula or add some liquid. Do not exceed the maximum level indication
on the jar.
Note: Make sure that the blended baby food has the right consistency (e.g. no lumps)
before you serve it.
Note: If the baby food is still too solid, add some fluid (e.g. water) until the baby food is
soft and smooth. Do not exceed the maximum level indication on the jar.
Note: Never steam baby food after you have blended it.
- English 15 -