Motorola MSF 5000 Instruction Manual page 123

Chapter
2
Operation
MSF
5000
Instruction Manual
Station Operation
2-4
Status Display
-
Chan
Mode
Key
A
three
digit
7-segmented
display
that indicates the
following
information:
©
Chan digit
indicates the current operating channel
Mode digit indicates
the current operating mode
©
Key
digit
indicates the selected encryption
key only when
the system is
equipped and configured for encode/ decode operation
The decimal point
to the
right of
the
digit
indicates that digit is
selected.
Select/Set Switch
The Select/Set switch allows local changes
to channels, modes, keys, and
EEPOT
settings.
When Select
is chosen, one of three digits in
the
Status display is
selected.
The
digit
can be changed
by using
the
Set switch.
When Set is
chosen, the selected
digit in
the
Status display is incremented by
one.
If
the
display
times out and Set is
selected, the system exits the status
display
mode.
Volume Control Knob
Rotate the volume control knob clockwise to increase or counterclockwise to
decrease the local speaker audio volume. The local audio is available on
the
optional Radio Metering Panel
(RMP)
or Diagnostic Metering Panel
(DMP).
Squelch Control Knob
Rotate the squelch control knob to adjust the local receiver squelch. Local
squelch
control is active only when the
Acc Dis/Reset switch
is
set to
Acc Dis.
Control
Jack
Used to
plug in
a
local test microphone or handset for local keying of
the intercom
or transmitter. The
test microphone recommended is
HMN1001, available
through Motorola National Parts.
PA Full
LED
A
green
light
indicates
a
PA key
request is active and the
PA
(set
level) is
providing full
adjusted power out.
PA On
LED
A
green light
indicates the
PA
is responding to
a
key
request.
Rx Lock LED
A
green
light
indicates the receive synthesizer is locked and functioning correctly.
68P81092E06
3/14/94