Motorola MSF 5000 Instruction Manual page 157

MSF
5000
Instruction Manual
Chapter 3
Installation
Installation
MSFI027
011494KOM
Figure 3-8
Bracket Installation for Overhead Support of Adjacent Cabinet
Stacks
Overhead Support of Back-to-Back Cabinets
1.
Remove
and retain two screws from each of the back-to-back top plastic
caps of the upper cabinets. Refer
to
Figure
3-9.
2.
Position
the
two brackets supplied with
the
stacking
kit
between the top
plastic
cap screw holes of
the
back-to-back upper cabinets.
3.
Install and tighten the four screws (removed in
step 1) through
the brackets
into the
top plastic caps.
4.
Install and tighten the four customer
supplied screws through the brackets
into
the overhead
support.
MSFI056
012194KOM
Figure 3-9
Bracket Installation for Overhead Support of Back-to-Back Cabinets
68P81092E03
3/19/94
3-15
MSF
5000
Instruction Manual
Chapter 3
Installation
Installation
MSFI027
011494KOM
Figure 3-8
Bracket Installation for Overhead Support of Adjacent Cabinet
Stacks
Overhead Support of Back-to-Back Cabinets
1.
Remove
and retain two screws from each of the back-to-back top plastic
caps of the upper cabinets. Refer
to
Figure
3-9.
2.
Position
the
two brackets supplied with
the
stacking
kit
between the top
plastic
cap screw holes of
the
back-to-back upper cabinets.
3.
Install and tighten the four screws (removed in
step 1) through
the brackets
into the
top plastic caps.
4.
Install and tighten the four customer
supplied screws through the brackets
into
the overhead
support.
MSFI056
012194KOM
Figure 3-9
Bracket Installation for Overhead Support of Back-to-Back Cabinets
68P81092E03
3/19/94
3-15