Typical Cabinet Installation Procedures - Motorola MSF 5000 Instruction Manual

Chapter
3
Installation MSF
5000
Instruction Manual
Preinstallation
CAUT
ON
Do not drill additional
holes into the cabinet or
damage
to the structure may result.
NOTE
All
hardware used
to
mount the cabinet to the floor or
existing structure is supplied
by
the customer.
Typical Cabinet Installation Procedures
The following
procedures
including
the
paragraph
reference are used to install a
cabinet.
1.
3-8
Determine the
type, location, and how
to mount the cabinet. Refer to
"Cabinet Information"
on page 3-4 and "Before Installing
a
Cabinet" on
page
37.
2.
Prepare the cabinet(s) for floor mounting
if
required. Refer to
"Cabinet
Dimensions and Details" on page
3-6.
Mount
or support the cabinet(s),
if
required. Choose the type
of support or
mount procedure for nonstacked or stacked cabinet. Refer
to
"Nonstacked
Cabinet Mounting" on page
3-10 and "Supporting of Cabinets" on page
3-14.
3.
Stack
the cabinet(s)
if
required. Refer to "Before Stacking Cabinets"
on page
3-11
and
"Stacking
a
Cabinet"
on page
3-12.
4.
Connect
the antenna. Refer to "Connecting an Antenna"
on page 3-20.
Connect
the control
wireline. Refer
to
"Connecting
the
Control Wireline" on
page
3-20.
6.
Connect the line cord or optional
DC
power
to the
Junction Box
if
required.
Refer
to
"Installing
the
Line Cord"
on page 3-23 or
"Installing
the
DC
Input
Power Option" on page
3-25.
7.
Connect the external site frequency standard
if
required. Refer to
"Connecting
the
Optional External Site Frequency Standard"
on page 3-26.
8.
68P81092E03 3/19/94