Front Panel 5 - Panasonic AK-HRP1010G Operating Instructions Manual

Front panel 5

1 [ND] indicator
2 [ND] setting buttons
3 [ND] display
4 [CC] indicator
5 [CC] setting buttons
6 [CC] display
7 [HEAD] button
2 3 6 5
1 4 9
7 8 12
This indicator indicates the ND filter setting status.
Status displays
Lit (green): Standard position set in the ROP menu.
Lit (orange): Updated from the standard position set in the ROP menu.
The standard position of the ND filter can be set in [MAINTENANCE] > [ROP
n
VOL/BUTTON] > [STD POSI ND] in the ROP menu.
"STD POSI ND" (see page 116)
Use the up and down buttons to select the ND filter setting.
When [HEAD] button off
Changes the ND filter setting.
When [HEAD] button lit
Only displays the ND filter position. (Switching is not possible.)
"ND filter" (see page 39)
This displays the ND filter position.
This indicator indicates the CC filter setting status.
Status displays
Lit (green): Standard position set in the ROP menu.
Lit (orange): Updated from the standard position set in the ROP menu.
The standard position of the CC filter can be set in [MAINTENANCE] > [ROP
n
VOL/BUTTON] > [STD POSI CC] in the ROP menu.
"STD POSI CC" (see page 116)
Use the up and down buttons to select the CC filter setting.
When [HEAD] button off
Changes the CC filter setting.
When [HEAD] button lit
Only displays the CC filter position. (Switching is not possible.)
"CC filter" (see page 40)
When [ECC] button lit
When [MAINTENANCE] > [ROP VOL/BUTTON] > [ECC BUTTON CTRL] is set to "VAR" in
the ROP menu, you can configure the [ECC] > [COLOR TEMP] values in the ROP menu.
"COLOR TEMP" (see page 76)
When [MAINTENANCE] > [ROP VOL/BUTTON] > [ECC BUTTON CTRL] is set to "MEM" in
the ROP menu, the setting values registered to memory presets A to E in the [ECC] menu
are recalled.
The recalled memory preset appears on the [CC] display.
In this state, the display will remain as the recalled memory preset, even if the [PAINT] >
[ECC] > [COLOR TEMP] settings in the ROP menu are changed.
This displays the CC filter position.
Use this button to enable filter control on the camera side.
The [HEAD] button also lights when the camera's [FILTER LOCAL] switch is pressed and lit.
Status displays
On: Filter control enabled on the camera side
Off: Filter control enabled on the ROP (this unit) side
- 25 -
10
11
Parts and their functions