Sd Dtl - Panasonic AK-HRP1010G Operating Instructions Manual

SD DTL

The control destination differs depending on the unit configuration.
When the camera is an AK-UC4000 or AK-UC3300
The fixed value is displayed. The setting cannot be changed.
When the camera is other than the above
The control is performed for the CCU. Otherwise, the control is performed for the camera.
The setting values will vary also depending on the connected camera.
Items with the function disabled are indicated by "-".
For details on each setting item, check also the operating instructions of the camera and CCU to be connected.
Item
H DTL LEVEL Adjusts the level of horizontal detail.
V DTL LEVEL Adjusts the level of vertical detail.
PEAK1 FRQ Selects the contour correction frequency band (boost frequency or peak frequency). Changes the contour
width.
PEAK2 FRQ Selects the contour correction frequency band (boost frequency or peak frequency). Changes the contour
width.
CRISP Set the noise elimination level for the detail signals.
LEVEL DEPEND Set the level of dark detail removal.
DARK DTL Set the level of dark detail enhancement.
SW Enables or disables the SD detail effect.
C 0 1 : A K - U C 4 0 0 0
S D D T L
H DTL V DTL
LEVEL LEVEL
15 25
LEVEL
CRISP DEPEND
0 0
- 88 -
1 / 1
PEAK1 PEAK2
FRQ FRQ
4.09 OFF
DARK
DTL SW
0 ON
Setting details
ROP menu