Cam Ip Search - Panasonic AK-HRP1010G Operating Instructions Manual

CAM IP SEARCH

The setting values will vary depending on the connected camera.
Item
CAM IP SEARCH Execute this to search for cameras connected to the same network and display them from the second line.
SAVE Select YES to reflect the setting values. If you exit the menu without selecting YES, the acquired information
will be cleared. The connection settings will remain in their original state.
HIT Displays the number of hits displayed in the list as search results.
CAM No. "NoAssign" is displayed as the search result for an unassigned camera.
The current camera control number is displayed for an assigned camera.
When assigning a camera control number to an unassigned camera, set the camera control number. You
can set a number within the range of 1 to 99. After setting is complete, perform a save.
C 0 1 : A K - U C 4 0 0 0
C A M I P S E A R C H
CAM IP
SEARCH SAVE
NO? NO?
CAM No. MAC xx:xx:xx:xx:xx:xx
NoAssign 192.168.0.20
CAM No. MAC xx:xx:xx:xx:xx:xx
NoAssign 192.168.0.21
C 0 1 : A K - U C 4 0 0 0
C A M I P S E A R C H
CAM No. MAC xx:xx:xx:xx:xx:xx
NoAssign 192.168.0.22
CAM No. MAC xx:xx:xx:xx:xx:xx
NoAssign 192.168.0.23
CAM No. MAC xx:xx:xx:xx:xx:xx
NoAssign 192.168.0.24
- 126 -
1 / 34
HIT
5
UCU600
UCU600
2 / 34
UCU600
UCU600
UCU600
Setting details
ROP menu