Rop Setup Software - Panasonic AK-HRP1010G Operating Instructions Manual

ROP Setup Software

ROP Setup Software is software to configure the settings for connecting the unit and a CCU from a personal computer. It allows you to con-
figure the settings while checking each item in a list.
First, use [NETWORK SEARCH] to search for the ROPs and cameras connected to the same network.
The search results will be displayed in [ROP List] and [CAMERA List].
The model name and IP address of each ROP are displayed in [ROP List].
The model name, MAC address, IP address, and port number of each camera are displayed in [CAMERA List].
ROP List
If you click the [LOAD] button in the corresponding ROP row, the connection setting information for the cameras controlled by the ROP is
acquired and displayed in [CONNECT SETTING List].
Connection authentication is required when connecting with an ROP. Enter the information in USER NAME and PASSWORD in advance.
If you click the [UPDATE] button, the information in [CONNECT SETTING List] is reflected on the corresponding ROP.
CONNECT SETTING List
This displays the setting information for connecting with cameras acquired from the ROP.
To newly set a camera to be connected, directly enter the settings in the list. Alternately, specify and set the camera from CAMERA List.
[CAMERA TYPE] column
[MAC ADDRESS] column
[IP ADDRESS] column
[CAMERA PORT NO] column
[USER NAME] column
[PASSWORD] and [ReTYPE
PASSWORD] column
Click " " and select the connection type. The connection types are identical to those of [CONNECT
SETTING] in the unit's ROP menu.
"Serial", "NetWork"
Select when connecting with the AK-HC5000 series, AK-UC3300 series, or AK-UC4000 series.
"Serial"
Select when serial connection.
"NetWork"
Select when IP connection.
Displays the MAC addresses of cameras linked with cameras of the unit.
The MAC addresses of devices acquired in [CAMERA List] are displayed.
Set the IP addresses of the CCUs to be connected.
Set the port numbers of CCUs to be connected.
CCU IP: 49152
Set the user names to be set on the cameras to be connected.
Set the passwords to be set on the cameras to be connected.
When USER NAME and PASSWORD are all to be set to the same settings, add a check to the [USER
AUTH: ALL] check box. When a check is added, the setting information set for camera control number
1 is reflected on the ROP when the information is updated.
- 133 -
Software