System; Rop Ip Setting - Panasonic AK-HRP1010G Operating Instructions Manual

SYSTEM

ROP IP SETTING

Item
NETWORK SETTING Selects whether to configure the settings individually (STATIC) like with a remote camera or to acquire them
from a server (DHCP).
The IP address for DHCP is acquired from a DHCP server. When the settings cannot be acquired from the
server, 192.168.0.130 is set for the IP address by default.
When this is changed from "DHCP" to "STATIC", set the IP address, subnet mask, and default gateway
again.
IP Sets the IP address of the unit.
This can be set as follows.
XXX.XXX.XXX.XXX (XXX is a value from 0 to 255)
Each octet can be set within the following range by input in the LCD menu.
1st octet: 1 to 223
2nd octet: 0 to 255
3rd octet: 0 to 255
4th octet: 1 to 254
In addition, the setting values will be checked when confirmed (written to flash memory), and an error mes-
sage will appear and setting will not be possible when the address is as follows.
0.*.*.*, *.*.*.0, *.*.*.255, 127.0.0.1
Class D address (224.0.0.0 to 239.255.255.255)
Class E address (240.0.0.0 to 255.255.255.255)
PORT Sets the port number of the unit.
A value from 1 to 65535 can be set.
However, any of the following ports can be selected, but an error message will be displayed and setting will
not be possible when confirmed (written to flash memory).
20/21 (FTP)
25 (SMTP)
42/53 (DNS)
69 (tFTP)
23 (telnet)
110/995 (POP3)
123 (NTP)
67/68 (BOOTP/DHCP)
10669/10670 (BOOTP)
161/162 (SNMP)
C 0 1 : A K - U C 4 0 0 0
R O P I P S E T T I N G
NETWORK
SETTING
STATIC
IP
192 168
PORT
35200
C 0 1 : A K - U C 4 0 0 0
R O P I P S E T T I N G
SUBNET
255 255
DEFAULT
GATEWAY
192 168
MAC ADDRESS
**-**-**-**-**-**
- 124 -
1 / 2
0 130
SAVE
(push)
2 / 2
255 0
0 1
SAVE
(push)
Setting details
ROP menu